FUJITSU PRIMERGY BX400 S1 - Manual (Page 95)

BX400 S1 Operating Manual 95
Hot-plug components
8.2.2 Connection Blade GbE Switch/IBP 36/8+2 (SB11)
The Connection Blade GbE Switch/IBP 36/8+2 can be used as a layer-2 switch
or an Intelligent Blade Panel (IBP). It provides the following connections:
– 36 internal 1-Gbit ports to the server blades
– 8 external 1-Gbit ports through RJ45 connections
– 2 external 10-Gbit ports through SFP+ modules for Ethernet connections via
fiber-optic or copper cable
– 1 internal stacking port to the midplane of the BX400 S1 system unit
– 1 external stacking port through a CX4 connection
The stacking ports allow up to 4 SB11 connection blades to be switched
together to form a so-called stack, see
"Connection blade stacking" on
page 98 .
This connection blade can be used in all connection blade slots, see figure
"Connection blade slots" on page 120 .
If the connection blade is installed in one of the slots CB 2, CB 3 or CB 4, the
server blades must have corresponding GbE mezzanine cards. For more
information, see the operating manuals for the relevant server blades.