FUJITSU PRIMERGY BX400 S1 - Manual (Page 125)

BX400 S1 Operating Manual 125
Hot-plug components
8.2.15 Installing a connection blade
V
CAUTION!
Note the safety instructions and the information on handling
electrostatically sensitive devices in
section "Safety instructions" on
page 31 .
Removing dummy module(s)
Any unused connection blade slots are fitted with appropriate dummy modules
to comply with electromagnetic compatibility (EMC) regulations and to ensure
sufficient cooling of the system components.
Figure 38: Dummy connection blade module
To add connection blades, you must first remove the dummy modules from the
relevant slots.