FUJITSU PRIMERGY BX400 S1 - Manual (Page 58)

58 Operating Manual BX400 S1
Installing the hardware
©
c
o gni
ta
s.
Ge
se
lls
ch
ft f
ür T
ec
hn
ik
-Do
ku
m
ent
at
io
n m
b H 20
12
P
fa
d:
C
:\P
rogr
am
m
e \F
CT
\t im
_ap
p\
tim
_l
oc
al
\w
ork
\W
A
LT
E
R
\O
B
J_
DO
K U
-9
24
5-0
04
.fm
4.7 Instructions for connecting/disconnecting
cables
V
CAUTION!
Please make sure you read the documentation for the devices before
you try to connect them.
Do not connect or disconnect any data transmission cables during a
thunderstorm.
Always pull cables out by the plug.
When connecting and disconnecting the cables, observe the following
order.
Connecting cables
Ê Switch off all the relevant devices.
Ê Unplug the power plugs of all affected devices from the power outlets or CEE
sockets.
Ê
Connect all cables to the system unit and the peripherals. Secure the
connectors of the data cables (e.g. by tightening the screws).
Ê Plug all data transmission cables into the sockets provided for the data or
telecommunication networks.
Ê
Plug all the power plugs into the power outlets or CEE sockets.
Disconnecting cables
Ê
Switch off all the relevant devices.
Ê
Unplug the power plugs of all affected devices from the power outlets or CEE
sockets.
Ê Pull all data transmission cables out of the sockets provided for the data or
telecommunication networks.
Ê
Undo the screws on the connectors and pull the relevant cables out of the
system unit and peripherals.