FUJITSU PRIMERGY BX400 S1 - Manual (Page 71)

BX400 S1 Operating Manual 71
Installation and operation
Ê To immediately shut down all server blades, press the On/Off button on
the front of the system unit (position 4 in
figure 13 on page 61 ) for 10
seconds. All server blades are switched off immediately.
Other ways to shut down the system unit
– Web interface of the management blade
You can also switch off the system unit and the individual server blades via
the Web interface of the management blade (see manual "PRIMERGY
BX400 Blade Server Systems ServerView Management Blade S1 User
Interface Description").
– After power failure
After a power failure, the system unit will switch itself on again automatically,
and the server blades which were running prior to the power failure are
automatically started up again according to the BIOS setting.
I
How to switch server blades on/off is described in the relevant operating
manuals.