FUJITSU DL3800 User Manual
Page 96
USING SETUP MODE
User's Manual
5-8
4. Select the current emulation.
Since you do not want to change the emulation, press the
FONT button to select the current emulation and print the next
item, and its options.
5. Change the font to Prestige Elite 12.
Press the LOCK button once to position the cursor beneath
PRSTG12. Press the FONT button to select PRSTG12 and print
the next item,
6. Select the current print quality.
Since you do not want to change the print quality, press the
FONT button to select the current print quality and print the
next item,
7. Change the pitch to 12 cpi and exit the MENU2 function.
Press the LOCK button once to position the cursor under 12
CPI. Since you do not want to make any other changes in
MENU2, press the ONLINE button to select 12 CPI and exit
MENU2. The <
8. Exit setup mode, saving the new font and pitch.
Since the cursor is under SAVE & END, press the FONT button
or the MENU button to select SAVE & END. The printer saves
Prestige Elite 12 and 12 cpi as the new power-on defaults in
MENU2. The printer then exits setup mode and returns
online. These settings remain in effect until changed.
#05 Chapter 5
2000.09.20, 2:36 PM
8