FUJITSU DL3800 User Manual
Page 120
USING SETUP MODE
User's Manual
5-32
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Options
Description
Items
The baud rate is in bps (bits per
300
second). Select the same baud rate as
600
used by your computer or modem.
1200
2400
4800
9600
19200
Indicates data transmission protocol.
XON/XOF
The DC1 and DC3 codes are used.
DTR
The Data Terminal Ready signal is used.
REV-CHL
The Reverse Channel signal is used.
IGNORE
DSR is ignored by the printer.
DETECT
DSR is detected by the printer.
FULL
Simultaneous data transmission occurs
in opposite directions.
HALF
Data transmission occurs in either
direction, but not simultaneously.
IGNORE
CTS is ignored by the printer.
DETECT
CTS is detected by the printer.
IGNORE
CD is ignored by the printer.
DETECT
CD is detected by the printer.
Selection of cut sheet feeder type
ASF
CSF made by BDT.
PAPRPRO
CSF made by Rutis Hauser.
<==END==>
Indicates the end of the HARDWRE
item list. Press the FONT button to print
the first item, which is
Press the MENU button to print the
previous item. Press the ONLINE button
to reprint the <
#05 Chapter 5
2000.09.20, 2:37 PM
32