FUJITSU DL3800 - Manual (Page 65)

User's Manual
Paper
Handling
PAPER HANDLING
3-15
4. Release the tractor locking levers by pulling them up. Open the
tractor paper holders. See the following figure.
5. Position the right tractor (as seen from the rear of the printer).
Push the right locking lever down to secure the tractor. Center
the middle forms support.
Locking lever
Positioning the tractors
Adjusting the left margin
Below the right tractor, as seen from the back, there is a tractor guide,
short inch-based ruler graduated in 10 columns per inch. Use the ruler
to help position the tractor. When the paper edge is positioned to the
left most line, the left margin is 12mm (0.5 inch) including perforation
area.
Left margin
(including perforation area)
Tractor guide
Paper holders
Locking levers
Release
#03 Chapter 3 2000.09.20, 2:33 PM 15