FUJITSU DL3800 - Manual (Page 46)

SETTING UP
2-24 User's Manual
3. Select the MENU1 function.
Locate the red cursor on the plastic print guide. Initially, this
cursor should be positioned under SAVE & END at the begin-
ning of the <> menu. Press the LOCK button
repeatedly to position the red cursor beneath MENU1, as shown
below:
Press the FONT button or the MENU button to select MENU1
and print the following options:
<>
SAVE&END MENU1 MENU2 H ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP
V-ALMNT
DPL24C+ XL24E ESC/P2
The currently selected emulation is indicated by a short under-
line. In the figure shown above, the Fujitsu DPL24C PLUS
emulation is selected.
4. Select an emulation.
Press the LOCK button repeatedly to position the red cursor
under the required emulation. Press the FONT button to select
the emulation and print the next MENU1 item.
Press the LOCK button to
position
the red cursor.
#02 Chapter 2 2000.09.20, 2:32 PM 24