FUJITSU DL3800 User Manual

Page 92

USING SETUP MODE

User's Manual

5-4

SAVE & END

Exits setup mode and saves any changes made
while in setup mode.

MENU1 and

Assigns print features to MENU1 and

MENU2

MENU2 on the printer control panel.

HARDWRE

Changes the printer hardware options.

ADJUST

Changes the print position adjustment options.

CONFIG

Changes the configuration options.

The initial printout contains a header, help menu, and <TION>> menu. The header tells you that the printer is offline and in
setup mode. The help menu provides a quick summary of how to use
setup mode. The <> menu lists all of the functions
available to you in setup mode. Note that the red cursor on the
plastic print guide is initially positioned below the SAVE & END
function.

Setup mode can also be entered by turning off the printer, then
turning the printer back on while pressing the FONT and MENU
buttons simultaneously until the printer beeps.

When you enter setup mode, the following <> menu is
printed:

OVERVIEW OF SETUP MODE

SAVE&END MENU1 MENU2 HARDWRE ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP

V-ALMNT

Table 5.1 summarizes the purpose of each function.

Table 5.1 Setup Mode Functions

Function

Purpose

#05 Chapter 5

2000.09.20, 2:36 PM