FUJITSU DL3800 User Manual
Page 135
Setup Mode
USING SETUP MODE
User's Manual
5-47
Printing the Self-Test
The SELF-TST function prints test pages to check how the printer
operates independently of your computer. The self-test does not
check the interface between the computer and the printer.
The self-test prints the printer’s firmware version, its resident
emulations, and all of the characters available in the currently
selected character set. For color printers having a color ribbon,
printing occurs in seven colors. If the DPL24C PLUS emulation is
selected for MENU1, the self-test is printed using the settings
currently assigned to MENU1.
Procedure
This procedure assumes that you are in setup mode. To print the self-
test, make sure that continuous forms paper is loaded into the printer.
Then proceed as follows:
1. Print the <
The <
the page. If the menu is not printed, press the ONLINE button
to print the menu. If you are using the HEX-DUMP function,
press the LOCK button instead of the ONLINE button to print
the menu. The following <
<
SAVE&END MENU1 MENU2 HARDWRE ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP
V-ALMNT
#05 Chapter 5
2000.09.20, 2:37 PM
47