FUJITSU DL3800 - Manual (Page 138)

USING SETUP MODE
User's Manual 5-50
Sample hex dump
4. Exit the HEX-DUMP function.
Exit the HEX-DUMP function in either of the following ways:
• To remain in setup mode, press the LOCK button. The
<> menu is then reprinted. For details on
other functions, see other sections in this chapter.
• To return to online normal mode, press the ONLINE button.
If you press the ONLINE button while the hex dump is
printing, The printer immediately switches to normal online
mode. Any data that was sent to the printer but not printed
is discarded (cleared).
You can also enter hex dump mode, by turning off the printer, and
then turning the printer back on while simultaneously pressing the
ONLINE button and the LF/FF button until the printer beeps.
#05 Chapter 5 2000.09.20, 2:37 PM 50