FUJITSU DL3800 User Manual

Page 163

User's Manual

7-9

Trouble-

shooting

Table 7.3 Operating Problems and Solutions (Cont.)

The printer is on

If you are using an RS-232C serial interface,

but it will not

make sure that the serial settings required by

print (continued). your software or computer are the same as the

settings on the printer. See the section Chang-
ing Hardware Options

in Chapter 5.

The cut sheet

Make sure that the cut sheet feeder is firmly

feeder does not

mounted on the printer.

operate.

Open the front cover and make sure that the
third stud from the left on the printer bottom
frame projects.

The double-bin

Make sure that the double-bin adapter is firmly

adapter does not

mounted behind the cut sheet feeder.

operate.

Open the front cover and make sure that the
fourth stud from the left on the printer bottom
frame projects.

Problem

Solution

TROUBLE-SHOOTING

#07 Chapter 7

2000.09.20, 2:40 PM