FUJITSU DL3800 - Manual (Page 108)

USING SETUP MODE
User's Manual 5-20
MENU1 and
MENU2 Items
Specifies the print start column for
changing the left margin. Printing
starts at the position given by this
column plus your software-specified
left margin.
## COLM Column 1, 2, 3, ..., 41
Specifies the number of space lines
for the top margin. The resultant
blank space is the
setting minus 1 line.
The total size of your top margin is the
above resultant value plus the following
two settings : top-of-form (default = 1
inch) and the software-specified top
margin. If you are using software to
specify the top margin, use the
default (1 line) for .
## LINE 1, 2, 3,4, 5, 6, 7, 8, 9, or 10 lines
LET-END
Software-
specified
margin
Top-of-form
Top margin
setting
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and
Epson ESC/P2 emulations. The notes are defined at the end of the table.
Options Description
#05 Chapter 5 2000.09.20, 2:36 PM 20