FUJITSU DL3800 - Manual (Page 129)

Setup Mode
USING SETUP MODE
User's Manual 5-41
Table 5.6 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG Items Options Description
Area-over detection control.
ENABLE Detects the left and right edges of
paper when loading the paper.
The printer does not print data
beyond the edges, but turns on the
AREA OVER indicator.
DISABLE Does not detect the edges. Select
this option when you are using
colored or preprinted paper.
Printer status after loading paper in
offline mode.
OFFLINE Remains offline after paper loading.
ONLINE Goes into online after paper loading.
Lock function of setup mode.
NONE Enables all buttons on the control
panel.
SETUP Disables the setup-related buttons
to keep the printer from entering
setup mode during the offline state.
ALL Disables the setup-rlated buttons
and the LOCK, FONT, and MENU
buttons.
Effectiveness of the Cut Sheet
Selection command (//S//).
DISABLE Makes the command ineffective.
ENABLE Makes the command effective.
Note: The Cut Sheet Selection
command (//S//) changes the paper
source to the paper table and waits
for manual insertion of a cut sheet.
#05 Chapter 5 2000.09.20, 2:37 PM 41