Rhythmic variation – Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer User Manual

Page 92

The T-1 Notebook : Reference & Guide

NOTES

▌ APPLYING MICRO-TIMING TO A TRACK

1. Select the pattern and track.

2. To view the current timing setting, Hold (TIMING). Also double Press

(TIMING) to lock value button timing display.

3. To adjust micro timed notes earlier on the grid;

•

While displaying the timing page, Press [VB9] - [VB11] to coarsely
set the defined notes early on the grid and Press [VB1] - [VB7] to
finely adjust. No timing adjustment when [VB4] & [VB12] are
selected. Most visual method.

•

Turn (TIMING) counter-clockwise. This changes the micro-timing
iteratively each rotary ‘click’.

•

Press & Turn (TIMING) counter-clockwise. This changes the micro-
timing iteratively each rotary ‘click’.

4. To adjust micro timed notes later on the grid;

•

While displaying the timing page, Press [VB13] - [VB15] to coarsely
set the defined notes early on the grid and Press [VB1] - [VB7] to
finely adjust. No timing adjustment when [VB4] & [VB12] are
selected. Most visual method.

•

Turn (TIMING) clockwise. This changes the micro-timing iteratively
each rotary ‘click’. Slowest method and least visual.

•

Press & Turn (TIMING) clockwise. This changes the micro-timing
iteratively each rotary ‘click’. Slowest method but more visual.

5. To change the grid division and hence defined note behaviour;

•

While displaying the timing page, Press [VB8] to increase the note
division x2.

•

While displaying the timing page, Press [VB16] to increase the note
division x4.

•

When both are lit same colour PINK

⬛

the default x1 division is set.

Rhythmic Variation