Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 196)

196 The T-1 Notebook : Reference & Guide
9.2 Analog Hardware Connections
The rear of T-1 is the location for the input / output connections for external
gear. These operate as the physical interface between other hardware
devices and can be configured within the T-1 Config utility.
Gate Outputs
a-b
CV Outputs
a-b-c-d
Configurable as Gates
Sync Out
Clock & Reset
Reset or Run Config
Sync In
Clock & Reset
CV Mod Input
Modulation ie Groove, Phrase
T-1 Config
CV/Gate Page
The CV and Gate outputs are configurable in the CV/Gate page of the T-1 Config tool. The
Outputs are linked to MIDI Channels. Whatever is sent to MIDI (CHANNEL) set on the T-1
hardware will also be output as assigned for the specific CV and Gate.
Pitch out at 0V is calibrated to C3
Analog Connectivity
9
NOTES