Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 44)

44 The T-1 Notebook : Reference & Guide
Generic Setup
2
Function Action T-1 Sequencer Command Description
Repeater Add Repeats Turn (REPEATS) Add or remove the number of repeats to a note pulse
Repeater Choke Press (REPEATS) + [VB8] Curtails repeats on a new note
Repeater Tail Press (REPEATS) + [VB16] Overlays repeats on a new note
Repeater Stop [CLEAR] Stops repeats when in repeater view
Time Repeat Time Turn (TIME) Adjust the repeat time division
Offset Repeat Ramps Turn (OFFSET) Adjust the repeater velocity ramp up or down
Pace Repeat Speed [CTRL] + Turn (PACE) Adjust the acceleration or deceleration of repeats
Pitch Assign Notes Hold (PITCH) + [VBx] Add or remove notes into the pitch menu
Pitch Transpose Notes Turn (PITCH) Transpose per note, the notes in the pitch menu
Harmony Chord variation Turn (HARMONY) Adjust chord variations from pitch menu notes
Scale Change Scale Hold (SCALE) + [VBx] Select an alternate scale
Root Root Note [CTRL] + Turn (ROOT) Select an alternate root note in the selected scale
Style Pitch Template [CTRL] + (STYLE) + [VBx] Select one of 6 style templates for melodic variations
Voicing Style amount Turn (VOICING) Amount of style transformation
Phrase Melodic phrase [CTRL] + (PHRASE) + [VBx] Selects one of 8 phrase templates for melodic patterns
Range Note range Turn (RANGE) Amount of note variation from phrase
Temp Performance Hold [TEMP] + Turn (Knob)
Temporarily adjust parameters and restores setting when
released. Ideal for performance actions.
Cycles Edit Cycle Tap [VBx] for Cycle Select on or more cycles to edit
Cycles Number of Cycles [CTRL] + Turn (CYCLES)
Increase or decrease number of available cycles. Also set the
absolute cycle number [CTRL] + (CYCLES) + [VBx]
Cycles Delete [CLEAR] + [VBx] In cycle view, clear a cycle parameter edits
Random Randomisation Hold (RANDOM) + Turn (Knob) Apply randomisation to the parameter
Random Variance Turn (RANDOM) Adjust random sequence variance probability
Random Apply Slew [CTRL] + (RANDOM) + Turn (Knob) Apply a slew smoothing to sequence steps
Random Phase Shift Hold (RANDOM) + (Knob) + [VB8] Phase shift random sequence earlier
Random Phase Shift Hold (RANDOM) + (Knob) + [VB16] Phase shift random sequence later
Channel MIDI Channel Hold (CHANNEL) + [VBx] Set the MIDI channel(s) for the track. Also Turn (CHANNELS)
Channel Routing Hold [CTRL] + (CHANNEL) + [VBx]
Route track out to track input. Sets track to input to from
currently selected track.