Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 173)

173 The T-1 Notebook : Reference & Guide
NOTES
8.9 MIDI CC Tracks as Presets
The T-1 has the ability to store CC numbers along with values within a
track. Each time the track is then loaded / launched the CC values are
transmitted to the device. It may be useful to reserve CC tracks purely to
set a parameter state on connected devices.
CC Track 15
Active Track
Example: CC Track Presets
OR
MIDI Channel
Destination
Device
CC Track 16
Pending Track
CC #74 CC #74
127 0 64 127 10 99
CC #77 CC #77 CC #82 CC #82
Tracks can be used to trigger or change a bank of CC values sent to a destination
device. This is ideal for example in automatically setting up a synth parameter
configuration at the start of a T-1 pattern.
Tracks: Tracks can be muted and unmuted to select the parameters to transmit. The
CC values will be updated and transmitted when a track is triggered i.e. pressing Play.
Patterns: Changing patterns will also trigger the track. This is useful when changing
CC’s on the fly, within a song. A copy of the same pattern can be made, then change
only the CC values for the preset tracks. This will then trigger the CC change with a
pattern change but as the patterns are otherwise identical, the song will play as normal.
MIDI & WiFi Connectivity
8