14 saving patterns and tracks with banks, Rhythmic patterns – Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer User Manual
Page 77

77
The T-1 Notebook : Reference & Guide
NOTES
Rhythmic Patterns
3
3.14 Saving Patterns and Tracks with Banks
T-1 has an auto-save function and will restore the previous bank on start
up. Patterns and Tracks, including the Parameters can also be manually
saved with the bank. There is no manual save for individual patterns or
tracks, but this is done within the process for saving the bank.
It is a good habit to regularly save the working bank as patterns are being
developed.
▌ SAVING A BANK
1. Edited, unsaved banks will illuminate PINK
⬛
when holding [BANK] and
in addition, will also flash if a pattern is playing.
2. To save a bank. Hold [CTRL] + [SAVE] + [VBx], ‘x’ is the value button of
the bank to save.
3. The bank button and it’s associated value button will flash PINK
⬛
indicating the bank is saved and then will turn white.
4. Release the buttons once save is complete.
▌ RELOADING FROM A SAVED BANK
1. Hold for 1 second, [BANK] + [VBx], where ‘x’ is the edited bank to
reload and is represented by value buttons 1-16.
2. The value button will flash green.
3. The previously saved bank in the slot is reloaded.
4. All banks are reloaded if the T-1 is powered up while holding [BANK].