Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 68)

68 The T-1 Notebook : Reference & Guide
NOTES
3.7 Division - Pattern Time Signatures
A pattern is made up of a sequence of steps where the note value of steps
is governed by the division parameter. This sets the tracks time signature.
The default state is 1/16
th but other options are available using the value
buttons or parameter knob. State and options are viewed by pressing
(DIVISION). Double tap (DIVISION) to lock the value button division view.
▌ SELECTING A DIVISION SETTING
1. Optionally lock the division view. Double tap (DIVISION). This is not
essential but is good practice. Just holding (DIVISION) will temporarily
view the state until the knob is released.
2. Value button state. The active division is displayed on a value button
illuminated WHITE ⬛ . Top row BLUE GREY ⬛ Indicates available
quadruplet divisions and bottom row BLUE ⬛ available triplets.
3. Selecting a division option. Turn (DIVISION) to quickly view and
change. When in locked division view, Press [VBx] Where ‘x’ is value
button 1-7 or 11-15 to select row and division.
4. The division can also be set freely with a resolution of 96 PPQN. Hold
[CTRL] + Turn (DIVISION) to adjust. The WHITE ⬛ Status value button
will flash when a free division is applied.
Division Options Group Value Button Option Colour
1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64 Quadruplets 1, 2, 3, 4, 5, 6, 7 BLUE GREY ⬛
1/3, 1/6, 1/12, 1/24, 1/48 Triplets 11, 12, 13, 14, 15 BLUE ⬛
Division View Mode.
Division View
Hold (DIVISION). Double tap (DIVISION)
to retain the value button display.
WHITE ⬛
Selected division
BLUE GREY ⬛
Quadruplets
BLUE ⬛
Triplets
OFF
Inactive Option
1/1 1/4
1/3
1/32
1/24
1/2 1/16
1/12
1/8
1/6
1/64
1/48
Rhythmic Patterns
3