Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 57)

57 The T-1 Notebook : Reference & Guide
NOTES
Rhythmic Patterns
3
3.4 Selecting Tracks
Pattern segments that will control each of the 16 tracks. The default view
when powering T-1 up is the track view. Track selection would therefore be
the first task in the process of building a sequence. Tracks can be edited
individually or multiple tracks edited together.
A track can operate in 3 modes; Default note sequencer mode, CC Mode
for controlling MIDI control change output messages and FX Mode to affect
incoming MIDI. Modes operate on the track in parallel so, for example
notes in the track can still play while operating in CC mode.
Tracks that are not selected are shown unlit on the value buttons. One or
more tracks can be selected simultaneously and will illuminate in the
representative track mode colour.
In Track view, double tapping the track button will switch to the pulse
sequencer view for note tracks and CC sequencer for CC Tracks. In the
case of an FX track, double tapping the value button will switch to the
chromatic manual pitch keyboard.
Track View
Track View
Default ‘home’ view. Shows the selected
track(s) on the value buttons. Mode
shown by colour of the track button.
ORANGE ⬛
Selected Note Track(s)
MAGENTA ⬛
Selected FX Track(s)
CYAN ⬛
Selected CC Track(s)
ORANGE ⬛
Selected Note Track(s)
[CTRL] + [VBx]
Selected when [CTRL] is released
Double tap CC Track to
switch to CC Sequencer
Double tap FX Track to
switch to chromatic keyboard
Double tap Note Track to
switch to pulse sequencer
MAGENTA ⬛
Selected FX Track(s)
CYAN ⬛
Selected CC Track(s)