Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 58)

58 The T-1 Notebook : Reference & Guide
NOTES
Rhythmic Patterns
3
▌ SELECTING ONE OR MORE TRACKS
1. Press [BANK] to ensure the ‘home’ track view is in focus. The track view
will be shown by default at start up. Currently playing tracks will flash.
2. Select a track. Press [VBx], where ‘x’ is the value button that represents
the desired track. Example, Press [VB1] to select Track 1.
3. The selected track will illuminate:-
• ORANGE ⬛ for normal sequencer mode for tracks.
• CYAN ⬛ for MIDI CC - Control Change mode for tracks.
• MAGENTA ⬛ for MIDI FX mode for tracks.
4. To toggle between the normal note sequence, MIDI CC or MIDI FX
modes, Hold [CTRL] + Press [VBx] where ‘x’ is the value button that
represents the desired track. The track will cycle between the modes
from each button press iteration. Track mode is only selected as active
when the [CTRL] button is released.
5. To select multiple tracks for simultaneous editing. Hold [VBx] + [VBx],
where ‘x’ is the value buttons that represents the desired tracks to
select. Example, Press [VB1] + [VB2] to select Track 1 & 2. The
selected tracks will illuminate ORANGE
⬛ or CYAN ⬛ or MAGENTA ⬛ .
▌ SWITCHING FROM TRACK TO PULSE VIEW
1. Press [BANK] to ensure the ‘home’ track view is in focus. The track view
will be shown by default at start up. Currently playing tracks will flash.
2. Select a track’s pulse view. Double tap [VBx], where ‘x’ is the value
button that represents the desired track. Example, Press [VB1] to select
Track 1.
3. The view will switch from track view to the pulses sequencer view.