Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 75)

75 The T-1 Notebook : Reference & Guide
NOTES
Rhythmic Patterns
3
3.13 Copying Patterns and Tracks
Tracks, Patterns and Parameters can be copied and pasted to another
location, essentially duplicating the settings. Copy is a secondary function
accessed with [CTRL] + [COPY]. There is no ‘undo’ when pasting patterns,
tracks and parameters and it should be remembered that this is a
destructive action overwriting any existing settings. Parameter data is held
within tracks and is therefore copied between tracks.
▌ DUPLICATING A TRACK
1. Ensure track mode is in view. Press [BANK] to return ‘home’.
2. Hold [CTRL] + [COPY] + [VBx], where ‘x’ is the track to copy,
represented by value buttons 1-16. Keep [CTRL] + [COPY] held.
3. The source value button will slowly flash GREEN ⬛ .
4. While Still holding [CTRL] + [COPY], press [VBx], where ‘x’ is the
destination track to paste into, represented by value buttons 1-16.
5. The destination value button will quickly flash GREEN ⬛ . The
destination will be overwritten with the copied track.
▌ DUPLICATING A PATTERN
1. Hold [CTRL] + [COPY] + [PATTERN] + [VBx], where ‘x’ is the pattern to
copy, represented by value buttons 1-16. Keep [CTRL] + [COPY] +
[PATTERN] held.
2. The source value button will slowly flash GREEN ⬛ .
3. While Still holding [CTRL] + [COPY] + [PATTERN], press [VBx], where
‘x’ is the destination pattern to paste into.
4. The destination value button will quickly flash GREEN ⬛ . The
destination will be overwritten with the copied pattern.