Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 101)

101 The T-1 Notebook : Reference & Guide
NOTES
4.12 Note Repeat Time
The note repeater time division is set by (TIME). This works in conjunction
with the repeats parameter. The length of notes set by (SUSTAIN) is also
applied to the repeated notes.
▌ SELECTING A TIME SETTING
1. Optionally lock the time view. Double tap (TIME). This is not essential
but is good practice. Just holding (TIME) will temporarily view the state
until the knob is released.
2. Value button state. The active time is displayed on a value button
illuminated WHITE ⬛ . Top row BLUE GREY ⬛ Indicates available
quadruplet divisions and bottom row BLUE ⬛ available triplets.
3. Selecting a time option. Turn (TIME) to quickly view and change. When
in locked division view, Press [VBx] Where ‘x’ is value button 1-7 or 11-
15 to select row and division.
4. A free running time option can also be set using [VB16] then turning
(TIME). The value button will flash WHITE ⬛ . to indicate free a time
setting is applied.
New pulses triggered will cut off any currently playing repeats or notes. The
repeats behaviour is managed by the choke or tail setting. Division is a macro
that also affects time and rate
Division Options Group Value Button Option Colour
1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64 Quadruplets 1, 2, 3, 4, 5, 6, 7 BLUE GREY ⬛
1/3, 1/6, 1/12, 1/24, 1/48 Triplets 11, 12, 13, 14, 15 BLUE ⬛
Time View Mode.
Time View
Hold (TIME). Double tap (TIME) to retain
the value button display.
WHITE ⬛
Selected division
BLUE GREY ⬛
Quadruplets
BLUE ⬛
Triplets
OFF
Inactive Option
1/1 1/4
1/3
1/32
1/24
1/2 1/16
1/12
1/8
1/6
1/64
1/48
Rhythmic Variation
4