Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 25)

25 The T-1 Notebook : Reference & Guide
NOTES
9. Double Press (CYCLES) to return to the cycles view. The first 4 value
buttons will be lit. The default starting point is 4 cycle slots.
10. While still viewing the (CYCLES) setting, Press [VB2] to select.
11. Turn (VOICING) to change the chord on the selected cycle. The voicing
page will be displayed while adjusting.
12. When the Cycle view returns, A RED ⬛ value button will indicate that
the cycle slot has been edited and contains changed values. The
[BANK] button also flashes RED
⬛ to indicate edit mode.
13. A cycle can be cleared by Holding [CLEAR] + [VBx] for the cycle
14. By iterating through steps 9-13 chord progressions can be created.
15. When satisfied with a chord progression, press [BANK] to leave edit
mode and return to home view.
16. Try adding different chords with (PITCH). Also try adjusting (RANGE)
and experiment with (STYLE) and (PHRASE).
17. In home view, Press [CTRL] + [SAVE] + [VBx] Value button of the bank
followed by [VBx] value button of the Pattern. Saving regularly
throughout developing a project is a good habit to get into.
18. Other variations of the chord can be created in each cycle slot. It is also
possible to copy cycles, example by holding [CTRL] + [COPY] + [VB1]
to copy and while holding [CTRL] + [COPY], press the destination slot
i.e. [VB2], [VB3] etc.
Getting Started
1