Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 217)

217 The T-1 Notebook : Reference & Guide
NOTES
System Configuration
10
Setting Function Description
1 Latency Clock Latency Allows compensation for any lag on
control between connected devices.
Clock Latency - Default 0.00ms. Can be
adjusted -200ms to 200ms if there is a
timing error between the clock and notes.
2 Link Sync Ableton Link Synchronisation Enables - On or disables - Off
synchronisation across wireless
connections with Ableton link
3 Start Stop Sync Synchronisation of transport T-1 reacts to incoming link messages
from peers for start stop when on.
4 Link Devices Number of connected devices Indicator of the number of link currently
connected devices.
5 Analog Clock Incoming and Outgoing clock Sets the PPQN - Pulses Per Quarter
Note rate for the analog clock connection.
6 Pulse Width Analog Clock Pulse Width Adjustment of clock pulse width for the
analog clock connections. Settings
between 15%-85% are available.
7 Analog Reset Analog Reset Input / Output Select option for the analog reset
connections. Can act as a short pulse
reset signal or run signal, high when T-1
is playing, low when stopped.
1
2
3
6
4
5
7
T1 Config - Sync Page
General synchronisation between devices. Mainly covers the wireless link and analog
signal connections which are accessed at the rear of T-1.
t|so