Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 55)

55 The T-1 Notebook : Reference & Guide
NOTES
Rhythmic Patterns
3
3.3 Selecting & Playing Patterns
Selecting a pattern is an integrated part of the bank selection process.
Patterns can also be individually selected both for playback and for editing.
Patterns selected will play in series, one after the other, while tracks play
simultaneously, in parallel within the pattern.
▌ SELECTING A PATTERN FOR EDITING - PATTERN STOPPED
1. Select a pattern. Hold [PATTERN] + Press [VBx], where ‘x’ is the value
button that represents the desired pattern.
2. While [PATTERN] is held, the state can be viewed on the value buttons.
Press [PATTERN] twice to lock the pattern view.
3. The currently selected pattern will be represented by the WHITE ⬛ lit
value button.
4. Patterns edited, with content are lit BLUE ⬛ . Empty patterns are lit
DARK BLUE ⬛ .
5. Select pattern can be edited.
▌ PLAYING A PATTERN
1. Press [PLAY]. The selected pattern will play and loop.
2. The active playing pattern will be represented by the WHITE ⬛ flashing
value button. Viewed in the pattern page by holding [PATTERN].
3. To queue a pattern for playback. While playing, Hold [PATTERN] +
Press [VBx], where ‘x’ is the value button that represents the desired
pattern to play next. Double press [PATTERN] to lock pattern view.
4. The queued pattern will be lit WHITE ⬛ until the previous pattern
concludes. The new pattern will flash when playing starts.
Pattern View
Press [PATTERN], Double Tap
[PATTERN to lock view. Shows the
selected and available patterns.
The playing pattern will flash white.
WHITE ⬛
Selected Pattern
DARK BLUE ⬛
Empty Patterns
BRIGHT BLUE ⬛
Chained Patterns
BLUE ⬛
Edited Patterns