Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 175)

175 The T-1 Notebook : Reference & Guide
NOTES
8.10 Random CC Sequence
The T-1 random sequence function can also be applied to each CC value
represented by a knob. The random sequence is 16 steps long with uni-
polar values that are added to the current CC value assigned to the knob.
▌ CREATING A RANDOM CC SEQUENCE
1. Press [BANK] to ensure the ‘home’ track view is in focus.
2. Select a CC track to edit. Press [VBx] where ‘x’ is the value button for
the track to select. CC Tracks will illuminate CYAN ⬛ .
3. Hold (RANDOM) + Press & Turn (Knob) of the CC track parameter to
attach the random sequencer. Also pressing the value button when
holding (RANDOM) + (Knob) will adjust the amount.
4. A slew option can be applied to smooth the sequence. Hold [CTRL] +
(RANDOM) + Press & Turn (Knob) to apply the curve.
5. The random sequence will generate uni-polar values, step by step that
are added to the current parameter value. This can add to or subtract
from the CC value and generate a parameter change sequence.
Example: CC Track Random Sequence
The default parameter will be modulated in time with the 16 step random sequence.
Each step of the random uni-polar sequence will affect the CC and create an evolving
parameter change pattern including any slew setting.
CC #74
64
24 40 +24
Example Filter Cutoff
Random Sequence
Slew
Knob
Default
MIDI & WiFi Connectivity
8