Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 202)

202 The T-1 Notebook : Reference & Guide
Analog Connectivity
9
9.8 Analog Application Example - T-1 Secondary Clock Follower
T-1 can also operate as the secondary follower of a clock which is under another devices primary
control. This is a less common configuration. Matching up the clock pulses and run signals is
important to ensure the right tempo synchronisation. Analog synchronisation options can be edited
in the T-1 Config tool.
Pam’s New Workout set as the primary lead, controlling T-1 as the secondary
clock follower. Any other connected devices to PNW will be synchronised.
T-1 as the secondary follower synchronised to PNW.
Example Configuration: T-1 with ALM Pam’s New Workout - PNW Eurorack Module
clk
Sync In
rst
Sync In
Patch Cables
Eurorack + PNW Environment
Pam’s New Workout output 5, Clock to T-1:
• Channel Multiplier = x24, Wave set to Gate.
Pam’s New Workout output 2, Run to T-1:
• Channel Multiplier = x1, Wave set to Gate.
T-1 Environment
Tempo will lead T-1
50% 24 PPQN
reset
reset
run
run
24 PPQN
Analog Clock
Analog Reset
Rate Pulse width
In
In
Out
Out