Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 42)

42 The T-1 Notebook : Reference & Guide
2.9 Command Quick Reference
Generic Setup
2
Function Action T-1 Sequencer Command Description
General Play / Stop Press [PLAY] Press the play transport button to play or stop a sequence.
General Play - No MIDI Hold [CTRL] + Press [PLAY] Play without sending Start / Stop for MIDI, Link, Analog reset.
General Exit - Home Press [BANK]
Press quickly to exit the current mode and return ‘home’. This
is the track view also the mode selected on start up.
General Secondary Option Hold [CTRL] + Button or + Knob Selects the secondary function of the control, labelled in grey
General Various Hold [VBx] + [VBx] Multiple selections can be made using the value buttons
General Lock display Double Press Knob
Where a visualisation on the value buttons exists, double
press the parameter knob will lock it’s value button display.
General Absolute Edit Hold (Knob) + [VBx]
Change parameter absolutely for track. Use [PATTERN] +
(Knob) + [VBx] to change across all tracks
General Relative Edit Turn (Knob)
Change parameter relatively for track. Use [PATTERN] + Turn
(Knob) to change across all tracks
Bank View Banks Hold [BANK] Value buttons will display state by their illumination colour.
Bank Select Bank Hold [BANK] + Press [VBx] Selects a bank ‘x’ - pattern selection automatically follows
Bank Save Bank Hold [CTRL] + [BANK] + [VBx] Saves the edited, selected bank ‘x’
Bank Reload Bank Hold [BANK] + [VBx] for 1 Sec Reload previously saved stave for bank ‘x’
Bank Clear Bank Hold [CLEAR] + [BANK] + [VBx] Clears bank ‘x’. [VBx] again to confirm.
Bank Copy Bank [CTRL] + [COPY] + [BANK] + [VBx]
Copy from ‘x’ source into ‘x’ destination. Keep 3 buttons held
and value button to copy and then value button to paste into.
Pattern Clear Pattern [CLEAR] + [PATTERN] + [VBx] Clears pattern ‘x’
Pattern Copy Pattern [CTRL] + [COPY] + [PATTERN] + [VBx]
Copy from ‘x’ source into ‘x’ destination. Keep 3 buttons held
and value button to copy, then value button to paste into.
Pattern Select Pattern [PATTERN] + [VBx] Select a pattern from within the existing bank.
Pattern Chain Patterns Press [VBx] + [VBx] + etc Select, in order, the patterns to play in a chained series
Track Select Track Press [VBx] In ‘Home’ track view, to select one track.
Track Multi Track Select Press [VBx] + [VBx] + etc In ‘Home’ track view, simultaneously select multiple tracks.
Track Track Type Press [CTRL] + [VBx] Cycle between Note, CC Track and FX Track
Track Switch Pulse View Double Tap [VBx] for Note Track Switch from note track to pulse view.
Track Switch CC View Double Tap [VBx] for CC Track Switch from CC Track view to CC Sequencer view
Track Switch FX View Double Tap [VBx] for FX Track Switch from FX Track view to chromatic keyboard view
Track Mute / Unmute [MUTE] + [VBx]
Mute and unmute tracks. Muting takes place when the mute
button is released.
Track Quick Mute [CTRL] + [MUTE] + [VBx]
Mute and unmute tracks. Muting takes place immediately
when the buttons are pressed.