Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 161)

161 The T-1 Notebook : Reference & Guide
NOTES
8.2 MIDI Hardware Connections
The rear of T-1 is the location for the input / output connections for external
gear. These can be configured within T-1 but act as the physical interface
between other hardware and software systems.
MIDI OUT
Transmits all MIDI sequencing and control information to a connected
device, system or application. For example a T-1 sequence will control a
MIDI synth module.
MIDI IN
T-1 receives MIDI information which can be directed straight out to MIDI
Thru port or can be processed by T-1 internal MIDI FX Track functions
before sending to the MIDI Out port. This is a unique and creative way to
use T-1 as a MIDI processor when sequencing on another device.
MIDI THRU
Transmits all MIDI information received on the MIDI input port to the MIDI
Thru output. T-1 does not affect the incoming MIDI and Thru is a replication
of MIDI In data. This is default behaviour but can be set as a second MIDI
Out in the T-1 Config settings.
MIDI USB
Transmits and receives MIDI from an external device. The USB connector
also acts as T-1 power source.
MIDI USB-C
USB-C to USB-A cable
(one supplied)
MIDI IN using a 3.5mm Jack to 5
Pin MIDI adapter type A.
MIDI Out, using a 3.5mm Jack to 5
Pin MIDI adapter type A.
(one supplied)
MIDI Thru, using a 3.5mm Jack to
5 Pin MIDI adapter type A.
MIDI & WiFi Connectivity
8