Sony Bluetooth Utility - Manual (Page 546)

5. Answering with the headset
If the service has been properly detected, a screen will appear indicating that the headset is being called, and a tone will accordingly
sound in the headset.
Please press the headset switch.
Important
o The procedure for operating the headset may differ depending on the manufacturer and model.
Please consult your user guide for a detailed description of how to operate the unit.
The [Add New Connection Wizard (Configuring (Connecting to Voice Circuit))] screen will appear, and device configuration will be
performed.
Note
o If you are connecting to the headset for the first time, or if another audio device has not yet been registered, the following [Found
New Hardware Wizard] screen will appear, from which you can proceed to install the driver.
If another audio device has already been registered (i.e., the driver has been installed), you can proceed to Step 9 without having
to install the driver.
6. Click on the [Next] button
The [Install Hardware] screen will appear.
7. Click on the [Continue Anyway] button
The following screen will appear automatically. You may disregard it and click on the [Continue Anyway] button.
Page 546