Sony Bluetooth Utility - Manual (Page 455)

Using a mobile telephone for fax transmissions
[FAX]
This section describes how to send a fax using a mobile telephone as a modem.
→ Setting up the mobile telephone
→ Setting fax information
→ Sending a fax
→ Receiving a fax
Important
 Please ensure that any drivers used to connect the PC to the mobile telephone have been installed.
 A Bluetooth passkey (PIN code) is required for you to connect to the mobile telephone. Please make a note of your Bluetooth passkey before
you start the set-up process.
 A fax application is required for you to be able to send and receive faxes. The description below is based on a example using Microsoft Fax,
which is installed with Windows XP as standard.
If you are going to use a commercially available fax application , then please refer to the manual that came with the application for information
on how to send and receive faxes.
Setting up the mobile telephone
Set up and register the mobile telephone as a fax service.
Procedure
1. Turn on the mobile telephone, and set it to be connectable
Note
o Please refer to the instruction manual for information on how to operate the telephone.
2. Right-click on the Bluetooth TM wireless technology icon in the task tray, and then click on [Add New Connection]
Note
o Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth Settings], and then click on [New Connection] from the
active [Bluetooth Settings] window.
Page 455