High End Systems High End LCD Controller for Studio Color - Manual (Page 97)

Studio Color LCD Controller Page Copy 4-13
4
Page Copy
Use page copy to copy the entire contents of a programmed
page to any other page in any other memory. This is useful
for creating additional pages that contain only slight changes,
such as movement changes or single-parameter changes.
Before continuing, make sure your controller is ready for
programming as shown in Figure 4-1 on page 4-3. Also,
make sure you have programmed at least one page.
1. Select the page (source) that you want to copy from using the
Page
and arrow keys.
2. Press the key. The LCD display appears as shown below:3.Select the destination memory and page you want to copy the
contents of the current page to: •Press the Cursor and arrow keys to change the memory number. •Press the Page and arrow keys to change the page number. When you press the Cursor or Page key for the first time, the
LCD display appears similar to the one shown below:The LCD display above would copy the contents of memory
1, page 5 to memory 2, page 1.4.Press the key to complete the page copy. ;)
('
* 3- <;0:
'
# + -# %
# $ -# +-/
<;0:
'
Pages: 1 … 95 96 97 98 99 … 272 wrong Brand wrong Model non readable See also other documents in the category High End Systems Acoustics: AF1000 (48 pages) Sitemap key. The LCD display appears as shown
below:
3. Select the destination memory and page you want to copy the
contents of the current page to:
• Press the Cursor and arrow keys to change
the memory number.
• Press the Page and arrow keys to change
the page number.
When you press the Cursor or Page key for the first time, the
LCD display appears similar to the one shown below:
The LCD display above would copy the contents of memory
1, page 5 to memory 2, page 1.
4. Press the key to complete the page copy.
;)
('
* 3- <
;0:
'
# + -# %
# $ -# +
-/
<;0:
'