High End Systems High End LCD Controller for Studio Color - Manual (Page 123)

Studio Color LCD Controller Selecting MSC or LSC 5-9
5
3. Press the Cursor arrow key to display the menu
options shown below:
4. Use the Cursor and arrow keys to select
;)
, as shown below:
5. Press the Construct and arrow keys to change
the selection between
77;D
)9/
or
;
$2$
(0*
D
)
.
6. Use the Cursor arrow key to select
7
and
continue with the next section.
Setting the Device ID
The device ID is used by MSC and LSC to identify master
controllers.
• In LSC, ID 0 (zero) means that the device responds to
any ID. For example, if you were to send out commands
to device ID 7 or ID 14 or ID 112, the controller with
device ID 0 would respond. Device ID 0 is the default
setting.
• MSC uses device ID 127 instead of ID 0 to tell a device
to respond to any ID.
E7G7 G) )
3 ,
7A 5
G G) ;7 0-/:
3 ,
;$2$
(0*
D
)