High End Systems High End LCD Controller for Studio Color - Manual (Page 167)

Studio Color LCD Controller RAM Card: Memory 7-5
7
2. Press the key to enter the menu system.
3. Use the Cursor and arrow keys to select
?
from the Main menu, as shown below:
4. Press the Cursor arrow key to view the possible
selections, then use the Cursor and arrow keys
to select
,
as shown below:
If the message
L-/
M
does not appear on the
LCD display, see the explanation below:
• If there is no card in the RAM card slot, or if the RAM
card is not fully inserted, the message appears:
L
M
Fully insert a RAM card into the slot (but
do not force it into the slot—turn it over if you feel
resistance); the LCD display message changes to:
L-
/
M
• If the RAM card’s write-protect switch is turned on, the
message appears:
L) M
Unlock the RAM card
as shown in “RAM Card: Write-Protection” on page
7-12.
5. Press the key.
The LCD display then appears as shown below:
) ? H-
- D()
, , 3,
-/
, , 3,
N /A<;0:A )