High End Systems High End LCD Controller for Studio Color - Manual (Page 137)

Studio Color LCD Controller Address Parameter Copy 6-7
6
Copy Parameters to Another Fixture, Same
Page
1. Select the memory and page containing the fixture with the
parameters you wish to copy.
2. Press the key, then press the Address key with the construct parameters you want to copy.3.Take one of the following actions:•If you selected “Share all constructs until selected”, do
not press any construct Construct keys to copy all of the
selected fixture’s constructs. Pressing one or more
Construct keys means you will copy only the selected
construct(s).•If you selected “Don’t share constructs until selected”,
press the Construct keys of the constructs you do wish to
copy.4.Press one or more address keys to copy construct parameters
to.5.Press the key to save the changes or press the key, then press the Address key with the
construct parameters you want to copy.
3. Take one of the following actions:
• If you selected “Share all constructs until selected”, do
not press any construct Construct keys to copy all of the
selected fixture’s constructs. Pressing one or more
Construct keys means you will copy only the selected
construct(s).
• If you selected “Don’t share constructs until selected”,
press the Construct keys of the constructs you do wish to
copy.
4. Press one or more address keys to copy construct parameters
to.
5. Press the key to save the changes or press the
key to discard changes.