High End Systems High End LCD Controller for Studio Color - Manual (Page 90)

4-6 Programming Guided Tour Studio Color LCD Controller
10. Use the joystick to position the beam in a different place of
your choosing.
11. Press the key to save page 2.
Recording Page 3
1. Press the key; it flashes.2.Press the Page arrow key to select page 3. 3.Press to complete the page copy.4.The controller is now set for memory 1, page 3. Press the key; it flashes.
2. Press the Page arrow key to select page 3.
3. Press to complete the page copy.
4. The controller is now set for memory 1, page 3. Press the
key; it flashes.
5. Press the keys of the fixtures you want to program.
6. Press the key, then use the Construct and
arrow keys to select
/
.
7. Press the key and select a different color of your
choice.
8. Use the joystick to position the beam in a different place of
your choosing.
9. Press the key to save page 3.
Recording Page 4
Use the same procedure as for recording page 3, making sure
you do all of the following:
1. Select a value of
%5
for the Delay construct.
2. Position the beam in a different place than in page 3.
3. Press when you’re finished.