Preparing to program, Figure 41 . before programming, make sure the con, Key until the standby led turns off. toggle the – High End Systems High End LCD Controller for Studio Color User Manual
Page 87: Key until the address led turns on. toggle the, Key until the select led turns off, Standby, Address, Menu, Select
Studio Color LCD Controller
Preparing to Program
4-3
4
Preparing to Program
Before beginning any programming, make sure the controller
appears as shown below:
Figure 4-1. Before programming, make sure the
controller’s Address LED is ON, the Select and
Standby LEDs are both OFF, and the controller is
displaying the Intensity, Memory and Page.
Toggle the
key until the Standby LED turns OFF.
Toggle the
key until the Address LED turns ON.
Toggle the