Initiate, Initiate[:immediate – HP E1418A User Manual
Page 81
INITiate
The
INITiate
subsystem changes the trigger state from idle to wait-for-trigger.
Subsystem Syntax
INITiate
[:IMMediate]
INITiate[:IMMediate]
Changes the trigger system from the idle state to the wait-for-trigger state.
Parameters
None.
Comments
•
If this command is received and the trigger system is not idle, an error is
generated.
•
If this command is received and no channels are waiting for a trigger event, an
error is generated.
•
Triggering is described in more detail on page 54.
•
Related Commands:
TRIGger:SOURce
,
SOURce
n
:VOLTage:TRIGgered
,
SOURce
n
:CURRent:TRIGgered
,
ABORt
INITiate
80 HP E1418A SCPI Command Reference
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com