HP E1418A - Manual (Page 146)

Current Calibration
Status Register
The Current Calibration Status Register provides a non-volatile record of
the current calibration status for each channel. This register is non-volatile.
Address
Base + 186
16
Bit 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
READ Ch
16
Curr
Cal
Stat
Ch
15
Curr
Cal
Stat
Ch
14
Curr
Cal
Stat
Ch
13
Curr
Cal
Stat
Ch
12
Curr
Cal
Stat
Ch
11
Curr
Cal
Stat
Ch
10
Curr
Cal
Stat
Ch
09
Curr
Cal
Stat
Ch
08
Curr
Cal
Stat
Ch
07
Curr
Cal
Stat
Ch
06
Curr
Cal
Stat
Ch
05
Curr
Cal
Stat
Ch
04
Curr
Cal
Stat
Ch
03
Curr
Cal
Stat
Ch
02
Curr
Cal
Stat
Ch
01
Curr
Cal
Stat
WRITE
Ch XX Curr Cal Stat: This field is set to a one (1) when the channel has
been successfully current calibrated. This field is set to a zero (0) when the
channel is not current calibrated.
Notes This register is not set or used by the hardware. The HP E1418A SCPI
driver, if used to calibrate the module, automatically sets the bits in this
register. If you use register programming to calibrate this module, you may
wish to use this register to record the calibration status.
The Voltage Calibration Status Register, the Current Calibration Status
Register, the Calibration Isolation Status Register, and the Calibration Card
Configuration Register are used together to store the overall calibration
status of the module.
Appendix B HP E1418A Register-Based Programming 145
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com