HP E1418A - Manual (Page 136)

Channel Trigger
Register
The Channel Trigger Register reports the trigger status for each channel.
Address
Base + 18
16
Bit 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
READ Ch
16
TM
Ch
15
TM
Ch
14
TM
Ch
13
TM
Ch
12
TM
Ch
11
TM
Ch
10
TM
Ch
09
TM
Ch
08
TM
Ch
07
TM
Ch
06
TM
Ch
05
TM
Ch
04
TM
Ch
03
TM
Ch
02
TM
Ch
01
TM
Ch XX TM: A one (1) in a field indicates a value has been written to the
channel Main DAC Triggered Register, but the output is not enabled until the
trigger is received. A zero (0) in a field indicates a trigger will have no effect
on the channel. The trigger events are set in the Trigger Control Register.
Notes You can output an immediate value on a channel that has been set for
triggered operation by writing a value to the Main_DAC Immediate
Register. The trigger mode for that channel is changed to the immediate
write-thru mode.
You can set a value on a channel to be applied at the next trigger event by
writing a value to the Main_DAC Triggered Register. The trigger status for
that channel will be changed to triggered.
Channels 09 through 16 will return ones (1) if the module is configured as
an 8-channel device.
Appendix B HP E1418A Register-Based Programming 135
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com