HP E1418A - Manual (Page 64)

ABORt
The ABORt subsystem disables the trigger system and places the trigger system in
the trigger idle state.
Subsystem Syntax ABORt
Parameters None.
Comments •
Following this command, the trigger system is in the idle state. Sending an
INITiate command after ABORt returns the trigger system to the wait-for-trigger
state.
•
Triggering is described in more detail on page 54.
•
Related Commands: INITiate[:IMMediate]
ABORt
Chapter 3 HP E1418A SCPI Command Reference 63
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com