HP E1418A - Manual (Page 80)

DIAGnostic:TRIGgered?
DIAGnostic:TRIGgered? returns a 16-bit word indicating the current trigger status
of the module.
Parameters Returns: unsigned 16-bit integer (uint16).
Comments •
This query returns a 16-bit word indicating the trigger status of each channel.
– A bit is set to 0 to indicate the channel is not waiting for a trigger.
– A bit is set to 1 to indicate the channel is in the wait-for-trigger state.
– Bits 0–15 correspond to channels 1–16, respectively.
•
Related Commands: TRIGger:SOURce
DIAGnostic
Chapter 3 HP E1418A SCPI Command Reference 79
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com