HP E1418A - Manual (Page 100)

STATus:QUEStionable:ENABle?
STATus:QUEStionable:ENABle? returns the mask set for the Questionable Status
Enable Register.
Parameters Returns: 16-bit signed integer (int16).
STATus:QUEStionable[:EVENt]?
STATus:QUEStionable[:EVENt]? returns the value of the Questionable Status
Event Register. Reading the register clears all bits in the register.
Parameters Returns: 16-bit signed integer (int16).
Comments •
Bit 8 of this register (decimal 256) is set when either:
– A channel is set to an output mode that has not been calibrated, or
– A channel fails the CALibration:TEST? query.
•
Bit 9 of this register (decimal 512) is set when a trigger-ignored event occurs.
•
*RST Condition: no effect.
•
*CLS clears the contents of the Questionable Status Register.
•
STATus:PRESet does not affect the contents of the Questionable Status Register,
but does disable reporting the Summary bit to the Status Byte Register.
STATus
Chapter 3 HP E1418A SCPI Command Reference 99
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com