HP E1418A - Manual (Page 16)

Ordering Options
The HP E1418A may be ordered from Hewlett-Packard in a variety of
configurations. As ordered, the module has the following options:
Description
HP E1418A 8-Channel D/A Converter with Non-Isolated Outputs
HP E1418A Option 001 16-Channel D/A Converter with Non-Isolated Outputs
HP E1418A Option 002 8-Channel D/A Converter with Isolated Outputs
HP E1418A Option 003 16-Channel D/A Converter with Isolated Outputs
Field Kits
The module can also be user configured as described beginning on page 166
of this manual. The following field expansion and configuration kits are
available:
Description Use
HP E1523A Single Channel Isolated
plug-on module To change a single channel from
non-isolated to isolated output.
HP E1524A Expansion kit, 8-Channel
Non-Isolated Outputs To add 8 additional non-isolated
channels to an existing 8-channel
module.
HP E1525A Expansion kit, 8-Channel
Isolated Outputs To add 8 additional isolated channels to
an existing 8-channel module.
Terminal Modules
The standard HP E1418A Terminal Module provides screw terminals for
connections. Two other terminal options are available with the HP E1418A:
– Crimp and Insert (Option A3E)
– Ribbon Cable (Option A3H)
– Terminal Module Housing without a terminal module PC board or
connectors included (Option 135)
Chapter 1 Module Setup and Installation 15
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com