Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 72)

Step edit section
72
En
Using the HARMONIZER
The Harmonizer can be used during Scale mode (page 39) or pattern
playback (page 26).
Notes
• Any notes triggered by the Harmonizer that are beyond the upper
limit of the MIDI note number will not be played back.
• If there are multiple notes in a step, the following will be the root note.
– The firstly triggered note in the step
– If multiple notes are triggered at the same time, the note with the
lowest PITCH value.
 Using the HARMONIZER in SCALE mode
1 Hold down one of the [HARMONIZER] buttons and tap the 16-
pads.
As the pad that is not the root, the chord set on the button is played. While
holding down the button, it lights up in red. When the button is released, it lights
dimly and the Harmonizer function turns off.
 Using HARMONIZER during the pattern playback
1 Press one of the [HARMONIZER] buttons.
As the note in the playing step is the root, the chord set on the button is played.
While holding down the button, it lights up in red. When the button is released,
it lights dimly and the Harmonizer function turns off.