Midi out] setting, Out1 mode, Out1 sync – Pioneer Toraiz SQUID - Creative Multitrack Sequencer User Manual
Page 133: Out1 start/stop, Midi out] setting (133), Out1 mode (133), Out1 sync (133), Out1 start/stop (133), Changing the settings
Changing the settings
133
En
[MIDI OUT] setting
You can change the settings of the following terminals.
The default setting is shown with *.
OUT1 Mode
Setting value: MIDI OFF, OUT*, OUT+MIDI IN, OUT+USB IN
Set the
[MIDI OUT1]
terminal.
•
MIDI OFF:
MIDI messages are not output.
•
OUT:
MIDI messages of the unit are output.
•
OUT+MIDI IN: MIDI messages of the unit and MIDI messages
received with the
[MIDI IN]
terminal are merged and
output.
•
OUT+USB IN: MIDI messages of the unit and MIDI messages
received with the
[USB-B]
terminal are merged and
output.
OUT1 Sync
Setting value: Disable, Send*
Set sending of the timing clock from the
[MIDI OUT1]
terminal to
Disable/Send.
OUT1 Start/Stop
Setting value: Disable, Send*
Set sending of the Start, Stop, and Continue messages from the
[MIDI
OUT1]
terminal to Disable/Send.