Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 36)

Step edit section
36
En
3 Press one of the 16-pads.
When pressing a pad where a pattern is saved (which is lit fully or lit dimly), the
pad lights up and is loaded as the current pattern.
When pressing a pad where no pattern is saved (whose light is turned off), an
empty pattern is loaded.
The number of the pattern loaded is shown on the display.
Example: When pressing pad 16
• When you switch the pattern during playback, the switch is applied at the first
beat of the next bar. The pad flashes in white until the pattern is switched.
• When pressing 16-pads while holding down [SHIFT] , the pattern is switched
immediately.
Saving a pattern
Select a pad where no pattern is saved (where the light is turned off)
and make changes to it, such as adding triggers and editing note
information. The changes will be saved to the pattern automatically.
Deleting a pattern
1 In Pattern mode, hold down the [COPY] button and [PASTE] button
together, and press a pad that contains a pattern.
The light of the pad that is pressed turns off and the pattern is deleted.