Pad] setting, Velocity, Velocity curve – Pioneer Toraiz SQUID - Creative Multitrack Sequencer User Manual
Page 117: Velocity threshold, Velocity sensitivity, Pad] setting (117), Velocity (117), E (117), Shold (117), Itivity (117
Changing the settings
117
En
[Pad] setting
The default setting is shown with *.
Velocity
Setting value: Disable, Enable*
Set VELOCITY to Disable or Enable. When it is set to Disable, the
VELOCITY value is fixed to 127 no matter how hard the 16-pads are
tapped.
Velocity Curve
Setting value: Soft 3, Soft 2*, Soft 1, Linear, Hard
Sets the strength required to tap the 16-pads and volume
characteristics.
Velocity Threshold
Setting value: Low 4 to Normal* to High 11
Sets the strength required to achieve minimum velocity when tapping
the 16-pads.
Velocity Sensitivity
Setting value: Light 11 to Normal* to Heavy 4
Sets the strength required to achieve maximum velocity when tapping
the 16-pads.